An Orbi 770 mesh WiFi system will help you access a flawless internet connection in every part of the house. It supports WiFi 7 technology and is backward compatible with previous WiFi technologies. To set this mesh WiFi system, refer to the instructions given in this blog. In addition to setup process, we will also shed light on the mesh system’s firmware update process.
How to Set Up Orbi 770 Series WiFi 7 System?
To set up the mesh WiFi system, you will need the Orbi app. However, it is also possible via the orbilogin.net URL. But, before that, make sure that you have access to a working internet connection in your house and your modem is functioning properly.
1. Mesh System Setup via Orbi App
Launch the Orbi app on your mobile phone. If you haven’t installed the app yet, go to orbi-app.com. As soon as the app is downloaded, you have to log in using the Netgear account details. After that, scan the QR code on the WiFi 7 router and then follow the in-app instructions. Now, you need to join the LAN and WAN port of your modem and the Orbi 770 series mesh router using an Ethernet cable. Thereafter, create the SSID and network key. You are also required to create an admin password and add satellites by following the on-screen instructions.
2. Mesh WiFi 7 Setup via Web Browser
To set up the mesh system using a web browser, connect your PC to the WiFi network of the Orbi mesh router using the network details given on the label. After that, go to orbilogin.net using an updated web browser. Using the instructions appearing on the dashboard of the router, set it up. Once the setup completes, place the satellites at their correct locations.
How to Update Orbi 770 Series WiFi 7 Mesh System Firmware?
You should update the Orbi 770 Series WiFi 7 Mesh System firmware as soon as the setup process completes. This process helps in adding new features to your device. It also prevents the home network from potential security threats. Follow the steps mentioned below to update the mesh system firmware:
- On a computer connected to the Orbi WiFi 7 router network, launch a web browser.
- Access the default IP or the local web address of the router.
- When the login page shows up, type in the valid username and password.
- The BASIC Home screen will appear.
- Click Management and go to Firmware Update.
- Check if a firmware update is available for your router.
- Follow the on-screen prompts to download and install the latest Orbi firmware update.
- Tap the satellite to update its firmware with the help of the instructions appearing on the screen.
This is how you can update the Orbi WiFi 7 mesh system firmware. The Orbi app can also be used for the process.
The Conclusion
Our post explaining the installation and firmware update process of the Orbi WiFi 7 mesh system ends here. We are hopeful that you will be able to set up the mesh system with the help of the given instructions.
